Panic bar installation comes down to three checks: whether the door needs panic hardware, whether the device fits the door, and whether it is installed correctly. Panic hardware lets people leave a commercial building quickly by pushing a bar or pad, so the wrong device or a poor installation can leave an exit door that doesn’t work when it matters.

These five tips cover what to check before you buy or install, and when to bring in a professional. DuPage Security Solutions installs and repairs panic hardware and other exit devices in Addison and across DuPage County. Questions about a specific door? Call 630.530.1300.

1. Find Out Which Doors Need Panic Hardware

Not every commercial door needs a panic bar, and not every door with a push bar meets the requirements for its location. The answer depends on the building’s use, its occupant load and the codes adopted in your area.

Two codes come up most often. The International Building Code (IBC) requires panic hardware on doors serving assembly and educational spaces with an occupant load of 50 or more, and on high-hazard spaces, in editions from 2006 onward, according to Allegion, a door hardware manufacturer. Illinois has adopted the 2015 edition of NFPA 101, the Life Safety Code, which the Illinois State Fire Marshal enforces.

Local building and fire departments can enforce their own adopted codes and editions. Confirm what applies to your property with your local building or fire authority before you buy or replace hardware.

2. Choose the Right Type of Panic Hardware

Start with the door: its material, width, existing lock and how often people use it. Most commercial panic hardware falls into a few types, as described in Allegion’s guide to panic hardware:

  • Rim devices mount on the surface of the door. They are the simplest to install and maintain.
  • Mortise devices work with a mortise lock body inside the door. They are less common because the door needs more preparation.
  • Vertical rod or cable devices are typically used on pairs of doors. The rods can be surface-mounted or concealed inside the door.
  • Multi-point devices combine vertical rods with a rim device for three-point latching.

The pad style matters too. Touchpad devices are the most common in modern buildings. Crossbar devices suit glass doors that need a slim profile.

Don’t choose on looks or price alone. If you are not sure what fits your door, we can assess the opening before you buy.

3. Check the Door and Its Existing Hardware

A new bar won’t fix a door that drags on the frame, a latch that fails to engage, loose hinges or a damaged frame. Look at the whole door assembly before you install, and fix those problems as part of the work.

Check for extra locks. In most cases you can’t add a deadbolt or other additional lock to a door that requires panic hardware. Exceptions exist for delayed and controlled egress.

If the door has electronic locks, a card reader, a keypad or an alarm, check how the panic device will work with them, including what happens in an emergency. Don’t assume a replacement bar will work with a newer electronic locking system. Have the full setup assessed first, so the door always allows the intended exit without creating a security problem.

4. Have It Installed by a Professional

Panic hardware has to be installed correctly so the door works as intended. Poor positioning, hardware that doesn’t suit the door, or an installation that interferes with the latch can stop a door from opening or closing properly. A qualified installer can assess the door, spot compatibility issues and test the hardware once it is in.

Professional installation does not by itself guarantee that a door meets every building or fire requirement. Confirm the requirements for your property with the local authority.

5. Keep Panic Hardware Maintained

Include exit doors in your routine property checks. Look for loose fittings, visible damage, a bar that sticks, a latch that won’t release, or a door that doesn’t close and latch. Follow the manufacturer’s maintenance instructions and arrange service when needed.

Keep the area around exit doors clear of stored equipment, carts and furniture. If an exit door isn’t working properly, have it repaired promptly. Routine checks don’t replace required inspections.

Frequently Asked Questions About Panic Hardware

According to Allegion, the touchpad or crossbar should be mounted between 34 and 48 inches above the floor and span at least half the width of the door leaf. Older installations may follow an earlier code, so confirm the requirements for your building with the local authority.

Where the ADA applies, door hardware must work with one hand without tight grasping, pinching or twisting of the wrist, and it must be mounted 34 to 48 inches above the floor, according to the U.S. Access Board. Which accessibility rules apply depends on your building. See our ADA hardware services or ask your local authority.

In many cases, existing commercial doors can accommodate panic hardware, but suitability depends on the door’s construction, condition, and current hardware. A professional assessment can help determine what the door needs before installation begins.

No. Compliance depends on the applicable requirements and the complete door assembly, not just the presence of a panic bar. Confirm the requirements for your building with the relevant local building or fire authority.

 The appropriate inspection and maintenance schedule depends on the hardware, the door’s use, manufacturer guidance, and any requirements that apply to the building. Include exit doors in routine property checks and arrange professional service if you notice damage or changes in operation.

Panic Bar Installation and Repair in Addison and DuPage County

DuPage Security Solutions designs, selects, installs, maintains and repairs panic bars and exit devices for commercial properties in Addison and throughout DuPage County. We can also add an alarm to a panic bar. We are a third-generation, family-owned locksmith company serving the area since 1962.

Learn more on our commercial door hardware services page, or contact us if you are planning a new installation, replacing worn hardware, or dealing with a panic bar that isn’t working, call 630.530.1300.

DuPage Security Solutions, Inc. 603 S. Addison Road Addison, IL 60101 IL License#: 192000195